Suzuki Baleno Manual page 336

OTHER CONTROLS AND EQUIPMENT
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Passkey", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Enter New Passkey", and
press the knob (1) to determine the
selection.
5) Press or turn "TUNE/FLD
SOUND" knob (1) to select "Confirm".
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a number for the first digit,
and press the knob (1) to determine the
selection. Select and determine num-
bers for the second, third and fourth
digits in order in the same manner.
When not entering up to the eighth
digit, enter blanks for the successive
digits.
7) Press "TUNE/FLD PUSH SOUND"
knob (1) to determine the passkey set-
ting.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
5-71
Deletion of phone information (Delete
Phone)
Follow the instructions below to delete the
registered phone information.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
PUSH played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "List Phone", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a phone to be deleted, and
press the knob (1) to determine the
selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Delete", and press the
knob (1) to determine the selection.
6) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Delete?", and press the
knob (1) to determine the selection.
7) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Confirm", and press the
knob (1) to determine the selection.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
BT function on/off (BT Power)
Follow the instructions below to turn on/off
®
the Bluetooth function.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "BT Power", and press the
knob (1) to determine the selection.
4) Press "TUNE/FLD PUSH SOUND"
knob (1) to select "BT Power On" or "BT
Power Off".
NOTE:
• When the BT function is turned off, the
connection between this unit and the
registered phone in use will be discon-
nected.
• When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
68PM2-01E