Cup Holder - Astoria Gloria AL Instruction Manual For User

C
8. up heater
8.2 AL - AEP version
To activate, deactivate or adjust the cup heater proceed as follows:
• remove the cup support grille;
• remove the drip tray;
• turn the thermostat; the temperature will be in proportion to the value indicated on the thermostat.
0 = cup warmer off
30 = minimum temperature
60 = medium temperature
90 = maximum temperature
8.2 SAE version
To activate. de-activate of adjust the cup heater, proceed as follows:
• Turn the programming key to OFF and the cup-heater switch
• Upon start-up of the machine, hold down the key PROG
indicate the current configuration of the cup heater as shown in the drawing below;
• To modify configuration of the cup heater, at machine start-up hold down the key PROG
flashing LED on the push button panel comes on steady;
• Press the key that corresponds to the desired configuration;
• Press PROG to confirm the operation.
i
It is possible to turn off the cup heater by simply placing in the OFF position the switch located above
the main switch of the machine.
18
AL - AEP - SAE
Cup heater Temperature
OFF
Temperature
70°C
to ON;
: on the push button panel, the flashing LED will
Temperature
80°C 100°C
Temperature
90°C
Thermostat
Cup heater
until the
Temperature
110°C