Programming Of Parameters Of The Machine - Astoria Gloria AL Instruction Manual For User

P
14.
rogramming of parameters
of the machine
• Turn the programming key to the ON position
P
( flashes on the display)
• Keep the MODE key
access to programming.
• To scroll through the various areas of the programming menu (see
alongside) use the MODE key
• Use the ENTER key
one within the same area.
• To modify the value of each parameter, use the increase
decrease keys.
i
All machine programming keys refer to the left push button
panel.
With the programming key in the ON position, the selections
i
are not active.
The system automatically exits the programming phase after
about 20 seconds from the last operation carried out. When
programming is finished, turn the programming key back
on OFF.
42
DISPLAY - ASD / DS
pressed for at least 3 seconds to have
.
to move from a parameter to the next
1.0 bar
09:16 09-02-04 1
and
dispenser alarm
min: xxx
120°C P
clock set-up
09:16 18-02-05 1
auto on/off
on 08:50
auto on/off
off 18:50
working days
1 2 3 4 5 6 7
reg. softener
00000000
boiler pressure
0.0 bar is=0.0
autosteamer
65 °C
cup heater
80°c
language
English
000 000 000
cappuccino
yes / no
cappuccino
milk > coffee
autosteamer
yes / no
wash
num: xxx
three layer
cold / warm