Settings; Clock Setting; To Synchronize The Telephone Clock With The Computer Or Caller Id - VTech IS6110 User Manual

Telephone settings

Settings

In this menu you can change the clock setting, key tone and IM alert tone of
the telephone. You can remove the VMWI indicator
when you do not have voicemail messages. You can also reset the telephone
settings back to the defaults.

Clock setting

By default, the telephone clock is set by the clock of the computer it is
connected to by the USB cord. You can choose to have the telephone clock
set by the next incoming call if you subscribe to the caller ID service (refer to
Caller ID operation on page 80), or you may set the clock manually.

To synchronize the telephone clock with the computer or caller ID:

Step 1:
Step 2:
Step 3:
Step 4:
49
Press the MENU softkey from the idle screen.
Press the , , and/or
press the SELECT softkey or the center NavKey/SELECT/
Press the up or down NavKey
then press the SELECT softkey or the center NavKey/SELECT/
To synchronize with the computer, press the up or down NavKey
to choose PC, and press the SELECT softkey or the center
or
NavKey/SELECT/ . The telephone clock will be synchronized with
the computer connected to automatically.
-OR-
To synchronize with caller ID, press the up or down NavKey
to choose CID, and then press the SELECT softkey or the center
NavKey/SELECT/ . The telephone clock will synchronize with the
caller ID after the first incoming call with caller ID information.
www.vtechphones.com
manually if it is on
NavKeys to choose Settings, then
or to choose Clock Setting,
Settings
Clock Setting
Key Tone
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
BACK SELECT
.
Settings
Clock Setting
Key Tone
.
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
Manual
BACK SELECT
Settings
Clock Setting
or
Key Tone
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
Manual
BACK SELECT
PC
CID
PC
CID