VTech IS6110 User Manual page 94

Troubleshooting
Problem
The telephone does
not ring when there
is an incoming call.
(continued)
I cannot dial out.
89
Suggestion
�� Test a working telephone at the telephone jack. If another telephone has the same problem,
the problem is in the telephone jack. Contact your local telephone company (charges may
apply).
�� The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
�� Re-install the battery and place the cordless handset in the handset charger.
�� Wait for the cordless handset to synchronize with the telephone base. To be safe, allow up to
one minute for this to take place.
First, try all the above suggestions.
�� Make sure there is a dial tone before dialing. It is normal if the cordless handset takes a
second or two to synchronize with the telephone base before producing a dial tone. Wait an
extra second before dialing.
�� If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact your local telephone company (charges may apply).
�� Eliminate any background noise. Noise from a television, radio, or other appliances may cause
the telephone to not dial out properly. If you cannot eliminate the background noise, first try
muting the cordless handset before dialing, or dialing from another room in your home with
less background noise.
www.vtechphones.com