To Record A Sound Clip Using The Handset Microphone; To Record A Sound Clip Using The Audio Cable - VTech IS6110 User Manual

Telephone settings
Record sound clips

To record a sound clip using the handset microphone:

Press the MENU softkey from the idle screen.
Step 1:
Step 2: Press the ,
press the SELECT softkey or the center NavKey/SELECT/
Step 3: Press the up or down NavKey
Clip, then press the SELECT softkey or
the center NavKey/SELECT/
Step 4: Press the up or down NavKey
Microphone.
Press the SELECT softkey or the center NavKey/SELECT/
Step 5:
The screen will display Record after the tone and a tone will be
played.
(Proceed to Step 7 on the next page)
-OR-

To record a sound clip using the audio cable:

Step 1: Using the audio cable provided, plug the small end into the headset
jack on the side of the handset (beneath the small rubber flap) and
plug the large end into an audio port
music player (e.g. Window Media player, Realplayer or iTunes) and
play a song on the computer. The sound will be transmitted through
the speaker of the handset.
Step 2: Press the MENU softkey from the idle screen of the handset.
Step 3: Press the ,
press the SELECT softkey or the center NavKey/SELECT/
NavKeys to choose Ringer, then
, and/or
or to choose Record Sound
.
or to choose Using
on your computer. Open a
NavKeys to choose Ringer then
, and/or
www.vtechphones.com
.
Ringer
Ringer Volume
Ringer Melody
Play Sound Clips
Record Sound Clip
.
BACK SELECT
Record Sound Clip
Using Microphone
Using Audio Cable
Remaining record time:
2:54
BACK SELECT
Record Sound Clip
Record after the tone
.
�� If there is an
incoming call
while recording
a sound clip,
recording will stop
automatically.
�� You can exit
the recording
procedure
anytime by
OFF
pressing .
The screen
will display
Recording
deleted
and the
sound clip will not
be saved.
44