To Set The Clock Manually - VTech IS6110 User Manual

Telephone settings
Clock setting

To set the clock manually:

Press the MENU softkey from the idle screen.
Step 1:
Step 2: Press the , ,
press the SELECT softkey or the center NavKey/SELECT/
Step 3: Press the up or down NavKey
then press the SELECT softkey or the center NavKey/SELECT/
Step 4: Press the up or down NavKey
the SELECT softkey or the center NavKey/SELECT/
time will be displayed.
Step 5: Press the up or down NavKey
increments of 1 while the field is highlighted.
-OR-
Use the keypad (see Chart of characters on page 37) to enter the
time directly.
Step 6: Press the left or right NavKey
field.
Repeat Steps 5-6 until the field of AM/PM is highlighted. Press the
Step 7:
up or down NavKey
Step 8: While the time is correct, press the SAVE softkey or
the center NavKey/SELECT/
and/or NavKeys to choose Settings, then
or to choose Clock Setting,
or to choose Manual, then press
or to adjust the number by
or to move the cursor to the next
to choose between AM or PM.
or
to confirm.
www.vtechphones.com
.
.
Settings
Clock Setting
. The current
Key Tone
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
BACK
Settings
Clock Setting
Key Tone
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
BACK
Manual Clock Input
07:11 PM
BACK
�� If you enter an
invalid time (e.g.
27:76), the entry
will not be saved.
�� Only the 12-hour
clock format is
accepted in the
clock setting.
SELECT
PC
CID
Manual
SELECT
SAVE
50