Charge Handset Battery - VTech IS6110 User Manual

Installation

Charge handset battery

After battery installation, there may be enough power for short calls. For optimal performance, we
recommend that you place the handset in the handset charger and allow the battery to charge for 16
hours before use. The CHARGE light on the handset charger will be lit to indicate that the handset
is charging. You can keep the battery charged by returning the handset to the handset charger after
each use. When the battery power is completely depleted, a full recharge takes about 16 hours. If the
handset will not be used for a long period, remove the battery to prevent possible leakage.
After the battery is fully charged, you can expect the following performance:
Operation
While in use (handset/headset)
While in use (speakerphone)
While in use (IM mode)
While not in use (standby*)
*Handset is off the charger but not in use.
The battery needs charging when:
�� A new battery is installed in the handset.
• The battery indicator on the handset display is flashing and empty.
Operating time
7 hours
2 hours
3 hours
96 hours
www.vtechphones.com 6