Wiring Connections - Raven SmarTrax Installation Manual

Case ih stx 275-450, new holland tj450

Hide thumbs Also See for SmarTrax:

CaseIH STX275-450/New Holland TJ275-450 SmarTrax Installation Manual

Wiring

Connections

Attach the wiring harness to the SmarTrax valve coil, pressure switch, and SPS.

Route the harness into the cab, securing it away from moving parts and heat

sources. For more instructions, refer to the Universal Kit Manual. Be sure the

rubber gasket is installed on the pressure switch connection.

The supplied SmarTrax controller bracket can be used to mount the controller in

the cab. The bracket attaches to the right A post pillar using the mount located

behind the small cover piece.

Table of Contents