Table of Contents
Advertisement
Operating instructions
4.4 Operating problems
4.4.1 Error messages
The display (4) shows different error messages, at the same time as the LED (2)
flashes.
ALARM
DOOR OPEN
OVERLOAD FEEDING
EMERGENCY SWITCH
LOW TEMP. TANK
LOW TEMP. FINAL RINSE
WEAK SIGNAL
WD-ACS 47D
CAUSE
At least one door is open.
Something has fallen into the
mechanism and the feed has
stopped.
Someone has pressed the
emergency stop button.
The washing temperature is too
low.
The rinsing temperature is too
low.
The photocell head has become
dirty.
28
ACTION
Close the door(s) and press button (8).
Remove any items and press button (8).
If the machine has been stopped using the
emergency stop button, reset the button by
turning it in the direction of the arrows. Then
press button (8).
Washing can still take place. Reset the
alarm by pressing button (11). Contact ser-
vice personnel.
Washing can still take place. Reset the
alarm by pressing button (11). Contact ser-
vice personnel.
Clean the photocell (15). The alarm in the
display will disappear after cleaning.
Rev. 1.0 (202003)
Advertisement
Table of Contents
