Table of Contents
Advertisement
Installation instructions
3.9 Documentation
4. Run the machine in manual mode:
•
Set all circuit breakers to the ON position.
•
Run the machine continuously for 10 minutes. Check and adjust the tem-
perature and water flow.
•
Final rinse approx. 5.5 l/min.
•
Total flow approx. 9.5 l/min.
5. Run a number of washes complete with loads and check:
•
There are no water leaks
•
The door breaker works
•
The limit switch is working
•
Steam discharge from the machine
•
The water temperatures are maintained
•
The washed items are clean
•
The washed items are dried
•
The chemical wash pump will not stop until the washed items have been
removed from the machine.
6. Final check: Empty the machine and turn off the power using the main switch.
•
Re-tighten all the connections on the circuit breakers and contactors.
7. Final check: Empty the machine and turn off the power using the main switch.
•
Washing
•
Care (daily, weekly and other frequencies)
•
Recommendation for annual service
For correct use and servicing, it is essential that the documentation accompany-
ing the machine is made available to personnel who will be using the machine.
The installation and user manual, which describes handling and care among oth-
er things, should be stored near the machine.
WD-ACS 47D
17
Rev. 1.0 (202003)
Advertisement
Table of Contents
