8683Xlr Module - Avaya 8800 Installation Manual

Avaya Ethernet Routing Switch 8800/8600 module fundamentals
Type
When Auto-Negotiation is disabled on a port,the port defaults to a particular speed (even if no
link connectionexists). The 10/100/1000 LED indicates this speed.
The Ethernet Routing Switch 8800/8600 8648GTR is an R module and supports the following:
• 256 000 IP routes
• 64 000 MAC records
• Release 4.1 and earlier: 16 000
Release 5.0 and later: 32 000
The 8648GTR module supports the prioritization of control MAC addresses. For more
information, see Avaya Ethernet Routing Switch 8800/8600 Configuration — Ethernet
Modules, NN46205-503.

8683XLR module

The 8683XLR module provides three bays for 10 Gigabit Ethernet small form factor-pluggable
(XFP) transceivers. The 10GBASE-R port (10.3 Gbps LAN PHY) operates in full-duplex
mode.
The 8683XLR module is comprised of three forwarding engine lanes. Each lane supports 10
Gbps bidirectional traffic. All three ports can run concurrently at 10 Gbps.
For general information on R modules, and information on the supported switch fabric and
power supplies, see
The 8683XLR modules support jumbo frames. The following figure shows the 8683XLR.
Figure 6: 8683XLR module
36 Installation — Modules
Label Color, State
Off
R modules on page 25.
Comments? infodev@avaya.com
Meaning
The module power is off. If the
switch power is on, the module is
performing the power-on self-test
and software initialization. A
module in this state is not yet
functional.
October 2014