Avaya 8800 Installation Manual page 68

Avaya Ethernet Routing Switch 8800/8600 module fundamentals
when the CPU is actively performing tasks, such as learning media access control (MAC)
addresses, updating routing tables, or interacting with the device management station.
The following table describes the 8895SF/CPU module LEDs.
Table 24: 8895 SF/CPU module LEDs
Link
100
Switch Utilization (8 LEDs) Green
CPU Utilization (8 LEDs)
R-CF (removable
[external] /pcmcia) LED
E-CF (embedded
[internal] /icf) LED
Power Supply 1,2,3
68 Installation — Modules
Label
Green/Steady
Off
Green/Steady
Off
Green
Green
Green
Green/Steady
Amber/Steady
Comments? infodev@avaya.com
Color, State
The management port is connected
and the link is good.
There is no link to the management
port.
The management port is operating
at 100 Mb/s.
The management port is operating
at 100 Mb/s.
The number of lit LEDs indicates the
utilization level (full-duplex
operation) of the switch fabric as
follows:
1 LED = 4.0 Gb/s - < 34 Gb/s
2 LEDs = 34 Gb/s - < 68 Gb/s
3 LEDs = 68 Gb/s - < 102 Gb/s
4 LEDs = 102 Gb/s - < 136 Gb/s
5 LEDs = 136 Gb/s - < 170 Gb/s
6 LEDs = 170 G/s - < 204 Gb/s
7 LEDs = 204 Gb/s - < 238 Gb/s
8 LEDs = 238 Gb/s - < 256 Gb/s
The number of lit LEDs indicates the
level of CPU activity (full-duplex
operation) as follows:
1 LED = 12%
2 LEDs = 24%
3 LEDs = 36%
4 LEDs = 48%
Indicates the system is accessing
the R-CF card.
Indicates the system is accessing
the E-CF card.
The specified power supply is
operating normally.
The specified power supply has a
fault.
Meaning
October 2014