Removing A Module Or A Power Supply Filler Panel - Avaya Ethernet Routing Switch 8300 Series Quick Start Manual

Hardware installation

Removing a module or a power supply filler panel

Remove any filler panels prior to installing the chassis to make it lighter to install.
Avaya ships 8300 series chassis with a filler panel covering each empty module slot.
Procedure steps
1. Using a Phillips screwdriver, loosen the 2 screws that fasten the filler panel to the
2. Pull the panel away from the slot.
26 Quick Start
Table 2:
Check
Bracket kit containing: two
rack-mounting brackets and
Phillips-head screws (8-32 X
1/4 - quantity 14 for 8306;
quantity 24 for 8310)
Screw package (10-32 X 3/4 -
quantity 10 for 8306; quantity
14 for 8310)
Side cable-management
brackets: two brackets for the
8310 chassis and one bracket
for the 8306 chassis
Rubber footpads (quantity 4)
Console cable with built-in
adapter
chassis.
The following figure shows the location of the filler cover for the 8306 and 8310
chassis.
Accessory
Support the chassis in an
equipment rack
Mount the chassis in an
equipment rack
Manage network interface
cables
Keep the chassis from slipping
when mounting it on a flat
surface
Connect an optional
management console to the
chassis. Each end of the cable
has a DB9 connector.
Use To
May 2011