Avaya 8800 Installation Manual page 41

The Port Status LEDs are below the port number label. The following table describes the
8612XLRS module LEDs.
Table 5: 8612XLRS module LEDs
Type
Port
Module
The 8612XLRS module is an RS module and supports the following:
• 256 000 IP routes
• 64 000 MAC records
• Release 4.1 and earlier: 16 000
Release 5.0 and later: 32 000
Installation — Modules
Label Color, State
Port status Green, Steady
(no label)
Green, Slow blinking
Green, Blinking
Off
Online Green, Steady
Amber, Steady
Amber, Blinking
Off
Interface module descriptions
Meaning
The port is connected and linked,
but no data flow occurs.
The port is administratively
disabled.
The port is transmitting or receiving
data. The blink rate indicates the
level of link activity.
The port is connected, but not linked
and has detected a Line/Remote
fault.
The module has completed the
power-on self-test and software
initialization, and is operating
normally.
• The module slot is disabled or
initializing the software.
• The module failed to boot
because, for example, the image
file failed to load.
The module failed to boot and is
running diagnostics.
The switch power is off or there is
no power to the module.
If the switch power is on, the module
is performing the power-on self
test.
A module in this state is not yet
functional.
October 2014 41