Avaya-Qualified Sfps, Sfp+S And Xfps - Avaya 8800 Installation Manual

The Ethernet Routing Switch 8800/8600 8848GT supports the following:
• 256 000 IP routes
• 64 000 MAC records

Avaya-qualified SFPs, SFP+s and XFPs

The supported SFP, SFP+ and XFP transceivers are listed in the following tables for use in
Ethernet Routing Switch 8800/8600 interface modules. Only those transceivers qualified by
Avaya are supported for use in Ethernet Routing Switch 8800/8600 modules. Transceivers not
qualified by Avaya can operate within the module, but are not tested for power draw,
electromagnetic interference, or interoperability.
For more information about the SFP, SFP+ and XFP transceivers including installation
instructions, see Avaya Ethernet Routing Switch 8800/8600 Installation — SFP, SFP+, XFP
and OADM Hardware Components, NN46205-320.
Table 19: Avaya-qualified SFP transceivers
SFP order number
100BASE Small form factor pluggable transceivers
AA1419074-E6
1000BASE Small form factor pluggable transceivers
AA1419043-E5
AA1419013-E5
AA1419014-E5
AA1419048-E6
AA1419015-E5
AA1419049-E6
AA1419069-E6 and
AA1419070-E6
AA1419025-E5 to
AA1419032-E5
AA1419050-E6
Installation — Modules
Description
100BASE-FX SFP, LC connector, 1310 nm, up to 2 km
Note:
The 8848GB, 8834XG, 8648GBRS, and 8634XGRS are
the only modules that support this SFP.
1000BASE-T, RJ-45, up to 100 m
1000BASE-SX, LC connector, 850 nm, up to 275 or 550 m
1000BASE-SX, MT-RJ connector, 850 nm, up to 275 or 550
m
1000BASE-SX, LC connector, 850 nm, DDI, up to 275 or
550 m
1000BASE-LX, LC connector, 1310 nm, up to 10 km
1000BASE-LX, LC connector, 1310 nm, DDI, up to 10 km
1000BASE-BX, LC connector, 1310 and 1490 nm, up to
10 km
1000BASE-XD, LC connector, CWDM 1470 to 1610 nm, up
to 40 km
1000BASE-XD, LC connector, 1310 nm, DDI, up to 40 km
Avaya-qualified SFPs, SFP+s and XFPs
October 2014 57