Machine In Use With A Water Tank - Profitec PRO 700 User Manual

Image 1
machine with direct water connection
Water supply adapter
Important
• Do not leave the machine switched on or unattended when not in use.
• Make sure to close the shut off valve of the water connection and to switch off the
electric main switch or to disconnect the power plug when the machine is not in
use.
• If you will not be using the machine for an extended period of time, we recommend
emptying the machine by letting the water run out via the brew group. To refill, proceed
as described in the initial start-up (section 5).
4.3.2

Machine in use with a water tank

When using the machine with a water tank, please turn the valve towards the water supply adapter
Image 3
Valve in position for operating machine
with water tank
Water supply adapter
Important
• Please make sure that only a service agent or similarly qualified person connects
the machine to the water supply and installs the pressure regulator and shut off
valve.
• To avoid calcification of the machine a water-softener is recommended.
• The machine may only be descaled by your service agent or similarly qualified
person because a partial disassembly of the boiler and the tubing may be
necessary to prevent the system from being blocked by lime residues. A late
descaling can cause substantial damage to the machine.
The residual water is disposed off periodically by emptying out the water drip tray.
Connection to the drain:
Alternatively, you can hook the machine directly up to a water drainage. Please proceed as follows: Remove
the sealing screw in the drip tray and fasten the drainage container to the rim below the drip tray. Connect
a suitable hose (not included with delivery) to the drainage container (connection Ø 14 mm) and to an already
installed drainage syphon. Slightly incline the hose so that the residual water can drain completely.
Translation of the German original user manual
Image 2
for direct water connection
Image 4
when operating machine with
water tank
ENGLISH
27