Dispensing Of Hot Water; Dispensing Of Steam; Cleaning And Maintenance; General Cleaning - Profitec PRO 700 User Manual

6.5 Dispensing of hot water

1 To dispense hot water the steam boiler has to be switched on. Press the right switch behind the drip
.
2 Place a suitable vessel (with heat-insulated grip) underneath the hot water wand. Now you can
dispense hot water (e.g. for tea). When dispensing large amounts of water, it is advisable to turn the
machine off so that no cold water is pumped anymore.
3 After having dispensed hot water, turn the machine back on. The boiler is automatically refilled with
fresh water.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch off the machine for dispensing hot
water.
Risk of injury
Always keep the hot water nozzle underneath the surface of the water while heating in
order to avoid splashing.

6.6 Dispensing of steam

The PRO700 makes it possible to generate large amounts of steam in order to heat or froth beverages, e.
g. milk or punch. It is a professional and compact espresso coffee machine with an enormous steam
volume. Therfore, within a few seconds, you can prepare milk froth. Please pay attention to the
instructions below. Do not bring the milk to a boil, otherwise frothing milk will not be possible.
1. To dispense steam the steam boiler has to be switched on. Press the right switch behind the drip tray
.
2. Important: In order to get the best results when frothing milk, open the steam lever for approx. 5.
seconds to release the condensation water in the pipe. This also prevents milk from being sucked into
the boiler.
3. Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
4. Re-open the steam handle / steam lever.
5. Heat and/or froth the liquid.
6. After frothing or heating, release some steam to keep the holes of the steam nozzle clean.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or
frothing in order to avoid splashing.
Avoid skin contact with the steam dispenser while cleaning!
Important
After every application, clean the steam nozzle and the steam dispenser with a non-
abrasive, damp cloth; This removes possible liquid residues.

7. CLEANING AND MAINTENANCE

A regular and accurate care is very important for the performance, the longevity and the safety of your
machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord
and let the machine cool down to room temperature before cleaning.

7.1 General cleaning

Daily cleaning:
Portafilter, filters, water tank, drip tray, drip plate of the drip tray require daily cleaning. Clean with warm
water and/or with a food safe detergent.
Translation of the German original user manual
ENGLISH
33