Water Supply Connection - Profitec Pro 700 User Manual

Hide thumbs Also See for Pro 700:
Table of Contents

Advertisement

Available languages

Available languages

Bedienungsanleitung / User manual Pro700

4.3 Water supply connection

Important
Make sure that the water connection line of the machine is connected to a potable water supply
with an operating pressure ranging from 0.5 to 2 bar. In case of an operating pressure of more
than 2 bars, use a pressure regulator.
Please note that often times the pressure of the water supply may vary. If the water supply
pressure temporarily exceeds 2 bars, use a pressure regulator. Furthermore, a shut-off valve
should be used. This valve should be located where it is easily reached, so that the water
supply can be interrupted at any time.
Position "0": water tank
connection
Machine in use with a direct water connection
The water connecting hose is to be connected to the water supply adapter (image 1).
When using the machine with direct water supply, the valve has to be turned towards the opposite side of the
water supply adapter opening (image 1). The water supply adapter is located in the rear part of the bottom
panel (image 1). Additionally, place the switch behind the drip tray into position "1" (image 2). Please make
sure that your water tap is always open during water-connection usage so that the machine never runs out of
water!
Image 1
Important
Do not leave the machine switched on or unattended when not in use.
Make sure to close the lock valve of the water connection and to switch off the electric main
switch or to disconnect the power plug when the machine is not in use.
Machine in use with a water tank
When using the machine with a water tank, please turn the valve towards the water supply adapter (image
3). Additionally, place the switch behind the drip tray into position "0" (image 4).
Image 3
Valve in position "1" for operating
machine
with
direct
connection
Place switch into position "1" for
direct water connection
Water supply adapter
Valve in position for operating
machine with water tank
Place switch into position "0"
when
operating machine with water
tank
22
Position "1": direct water
water
Image 2
Image 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents