Download Print this page

Disposal Of The Product; Ce Declaration Of Conformity - Nice Era Fit Series Instructions And Warnings For Installation And Use

Tubular motor
Hide thumbs Also See for Era Fit Series:

Advertisement

Available languages

Available languages

7
WARNINGS FOR ORDINARY USE
OF THE MECHANISM
7.1 - Maximum continuous work cycle
In general, the motors in the "Era" line were designed for residential use and there-
fore for discontinuous use. They guarantee a maximum operating time of 4 minutes
and in cases of overheating (e.g. caused by continuous prolonged operation) a "ther-
mal protector" for safety intervenes to cut out the power supply, restoring it when the
temperature returns to normal.
7.2 - Commanding partial opening/closing of the
awning/shutter (height "H")
In general, to command the partial opening/closing of the awning (or shutter), press
the key associated with the partial height during programming (for more information,
read point 06 of procedure 5.8). If the transmitter has only three keys and only one
"H" height is memorised, simultaneously press keys s and t to recall this height.
What to do if...
(troubleshooting guide)
q
responds to the values indicated in the technical characteristics of this manual
by measuring the electricity between the "common" wire and the electrical phase
wire supplied with current. Finally, try to supply the opposite electrical phase.
q When sending a Raise command, the motor does not start:
This can happen if the awning/shutter is near the Upper limit switch ("0"). In this
case you must lower the awning/shutter a little bit and give the Raise command
again.
The system operates in the emergency condition with an operator pre-
q
sent:
shock.
– Make sure each part of the motor is still in good condition.
– Perform the deletion procedure (paragraph 5.13) and adjust the limit switches
again.

Disposal of the product

sonnel at the end of the product's lifespan.
The product is made of various types of materials: some of them may be recycled,
while others must be scrapped. Find out about recycling and disposal systems in
use in your area for this product category.
may contain polluting or hazardous substances which, if released to the environ-
cated by the symbol appearing here, the product may not be disposed of
with other household wastes. Separate the waste into categories for dis-
posal, according to the methods established by current legislation in your
area, or return the product to the retailer when purchasing a new version.
disposal of this product.
The product's packaging materials must be disposed of in full compliance with lo-
cal regulations.
Power supply voltage: see data on rating plate
-
Resolution of the encoder: 2,7°
Continuous operation time: 4 minutes
Minimum operating temperature: -20°C
Level of protection: IP 44
Notes:
of 20°C (± 5°C).
– Nice reserves the right to apply modifications to products at any time when
deemed necessary, maintaining the same intended use and functionality.

CE declaration of conformity

. . .
(...) conform to the essential requisites and other pertinent provisions laid down
by directives 1999/5/EC, 2006/95/EC, 2004/108/EC. The EC declaration of
conformity can be consulted and printed at www.nice-service.com or request-
. . .
-
– Some parts of the product
.
-
E Fit S (...), E Fit M (...), E Fit L
Mr. Luigi Paro
(Managing Director)
English – 14

Advertisement

loading

This manual is also suitable for:

E fit sE fit mE fit l