Nice Era Fit Series Instructions And Warnings For Installation And Use page 12

5.14 - Locking and unlocking the memory
This procedure allows you to lock or unlock the memory to prevent accidental memorisation of other transmitters not included in the system.
Before starting the procedure, bring the awning (or shutter) to the midpoint of its stroke.
01.
n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
04. s and t keys pressed simultaneously and wait for the motor to perform 2 movements. Upon completion, release the keys.
05. • To unlock the memory
• To unlock the memory
01
5
sec.
04
5
sec.
Note – When performing the procedure, at any time you can cancel it by keeping the n and t keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
11 – English
s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
t key pressed and wait for the motor to perform 5 movements. Upon completion, release the key.
02
2
2
3
5
sec.
05
5
sec.
05
5
sec.
03
3
5
sec.
END
3
END
5