EN
The displayed values depend on the installation status:
State
Ajustement in Progress
Out of welding
In welding
Post welding
Notes :
The post welding time is configurable on the power source. The last measures are still available on the power source (see the power source
instruction manual).
Definition of serigraphy symbols:
Symbol
3.4. PROGRAMS MANAGEMENT
Presentation
Displayed values on (5) and (9)
No values, these are replaced by dashes
Instructions or theoretical values
Direct measurements
Last welding measures
Function
Amperage
Wire speed
Thickness
The number, the name and the status of the current program
12
are displayed on line 1 of the LCD.
Button (-) to select the previous program
13
14
Button (+) to select the next program
15
Button (OK) to access to the program management
Unit
Symbol
A
m/min
mm
Indicator (8)
Function
Voltage
Arc length
Fine tuning/dynamism
Off
Off
Blinks
Fixed
Unit
V
13