Setting Up; Precautions; Assembly Of Options; Wire Feed Unit Connection - Air Liquide SAF-FRO DVU W500 Instruction For Operation And Maintenance

EN

2 - SETTING UP

2.1. PRECAUTIONS

To protect the front projections, hold closed the transparent cover.
Ensure not to pinch the cables and gas pipes and water
Ensure correct installation of power connections. The quarter turn connection must be well tightened
Do not leave, liquid, hot material in contact with the cables.
The stability of the system is supported up to angles of 10 °.
When slinging wire feeder, do not use ecological spool.
The connection of the wire feeder unit is to made while the generator is off.

2.2. ASSEMBLY OF OPTIONS

Before connecting the wire feeder, the following options have to be assembled :
Trolley option
Liter flow option
Pivot support option
Push pull option

2.3. WIRE FEED UNIT CONNECTION

For the wire feeder and connection options, follow the instructions of the quick start.
Any connection or disconnection of the wire feeder on the installation has to be done when the installation is switched off.
For slinging the wire feeder, you must use the metal hook at the base of the handle.
Euro-connection MIG & TIG -
P1
Connection MMA
P2
Remote plug
P3
Push Pull plug option
P4
Torch water connections
P5
5