Toro 4045 Operator's Manual page 32

Loader-calibration Screen
To access this screen, press button number 6 on the
Main-selection Screen (page
This screen allows you to calibrate the loader cam or to
calibrate the loader arm.
This screen also allows you to adjust the cam-stop positions,
ensuring that the cam is in line with the pipe row.
Press the following buttons to calibrate the loader cam or
loader arm:
•
Press button number 1 to calibrate the loader cam
29).
•
Press button number 2 to calibrate the loader arm
29).
1
1
2
3
4
ESC
3
Loader-calibration Screen
1. Calibrate loader cam
2. Calibrate loader arm
30).
2
OK
Figure 29
3. Return to the
Main-selection Screen
Loader-cam-calibration Screen
To access this screen, press button number 1 on the
Loader-calibration Screen (page
This screen allows the user to set the row positions for the
pipe holder.
Press the following buttons to set the desired position:
•
Button 1—Set position 1
•
Button 2—Set position 2
•
Button 3—Set position 3
(Figure
•
Button 4—Set position 4
(Figure To set the load or unload position, press button number 5
(Figure 30).
5
6
7
8
g025090
1. Set position 1
2. Set position 2
3. Row number
4. Row selected check mark
5. Set load/unload position
32
32).
(Figure 30)
(Figure 30)
(Figure 30)
(Figure 30)
Figure 30
Loader-cam-calibration Screen
6. Return to the previous
screen
7. Loader cam not set (X in
circle)
8. Set position 3
9. Set position 4