Toro 4045 Operator's Manual page 17

125-6125
1. Warning—read the
Operator's Manual.
2. Explosion hazard;
electrical shock
hazard—do not dig before
calling local services.
3. Press to apply thread-joint
compound.
4. Press and hold for
maximum drilling fluid
pressure; release to stop
the flow.
5. Press to turn the
drilling-fluid pump on
or off.
6. Press and hold to move
the drill carriage at high
speed up or down the drill
frame.
7. Mode I—spin drill spindle
clockwise. Mode II—left
trigger pressed, open the
lower wrench (stationary
wrench); left trigger
released, raise the pipe
elevator.
8. Mode I—spin drill spindle
counterclockwise. Mode
II—left trigger pressed,
close the lower wrench
(stationary wrench); left
trigger released, lower the
pipe elevator.
9. Thrust the drill carriage
forward.
10. Pull the drill carriage
rearward.
1. Forward left
2. Increase rpm
3. Engine speed
4. Decrease rpm
5. Reverse left
1. Press the operator presence switch to enable machine
movement.
1. Pull up to start the engine.
17
125-1641
6. Forward right
7. High
8. Track speed
9. Low
10. Reverse right
125-1621
125-1622
2. Push down to stop the
engine.