Toro 4045 Operator's Manual page 15

1. Engine—start
2. Press down to stop the engine
3. Pull up to start the engine
4. Reset Zap-Alert system
5. Zap-Alert system triggered
6. Unlock exit-side lockout
7. Reset exit-side lockout
8. Engage drive movement and setup functions
9. Engage drill carriage movement and other drill functions
10. Turn the work light On or Off
11. Swing the cab in or out
12. Windshield-wiper control
125-6158
Model with Cab only
13. With trigger released, rock forward to rotate basket toward
pipe cam, rock backward to rotate basket toward drill frame.
14. With trigger released, upper button closes pipe gripper, lower
button opens pipe gripper.
15. With trigger pressed, rock forward to rotate the upper wrench
(makeup/breakout wrench) counterclockwise to loosen a joint;
rock rearward to rotate the upper wrench (makeup/breakout
wrench) clockwise to tighten a joint.
16. With trigger pressed, press front or rear button to resume
the previously set auto-drill speed; press and hold the front
button to increase the auto-drill speed; press and hold the
rear button to decrease the auto-drill speed.
17. Mode I—left trigger released, extends pipe gripper toward drill
frame; left trigger pressed, opens lower wrench (stationary
wrench). Mode II—spin drill spindle clockwise.
18. Mode I—left trigger released, extends pipe gripper toward pipe
holder; left trigger pressed, closes lower wrench (stationary
wrench). Mode II—spin drill spindle counterclockwise.
19. Mode I—left trigger released, lowers pipe elevator; left
trigger pressed, opens upper wrench (makeup/breakout
wrench). Mode II—left trigger released, extends pipe gripper
toward drill frame; left trigger pressed, opens upper wrench
(makeup/breakout wrench).
20. Mode I—left trigger released, raises pipe elevator; left
trigger pressed, closes upper wrench (makeup/breakout
wrench). Mode II—left trigger released, extends pipe gripper
toward pipe holder; left trigger pressed, closes upper wrench
(makeup/breakout wrench).
21. Exit-side lockout—drill-enabled light
22. Transmitter-battery-status Light
23. Increase or decrease the engine speed
24. Rotate the cab clockwise or counterclockwise
15