Toro 4045 Operator's Manual page 31

Figure 25
250-Hour Maintenance Screen
Figure 26
500-Hour Maintenance Screen
Figure 27
1000-Hour Maintenance Screen
Error Codes Screen
To access this screen, press button number 3 on the
Main-selection Screen (page
This screen displays the number of drill errors and engine
errors that have occurred.
If more than 1 drill or engine error is shown on the screen,
press button 5 to see the next drilling error, button 7 to see
the next engine error, or button 8 to see the previous engine
error (Figure 28).
Note: If there are no drilling errors or engine errors, press
the OK button to exit this screen
1
1
2
3
4
ESC
5
Error Codes Screen
1. Total number of drill errors
2. Next engine error
3. Next drill error
Diagnose and Adjust Parameters Screen
To access this screen, press button number 5 on the
Main-selection Screen (page
Contact your Authorized Toro Service Dealer to diagnose
and adjust parameters.
Note: To access the Diagnose and Adjust Parameters Screen,
you are required to have the access PIN for the machine.
31
30).
(Figure 28).
2
3
OK
4
Figure 28
4. Previous engine error
5. Total number of engine
errors
30).
5
6
7
8
g025089