Toro 4045 Operator's Manual page 28

Drill-rotation-speed Screen
To access this screen, press the OK button on the
Operating Screen (page 26).
This screen allows the user to increase or decrease the
rotation speed of the drill.
To change the rotation speed of the drill, perform the
following:
1. Press the Left arrow to decrease the speed, or press the
Right arrow to increase the speed
2. Press the OK button to set the drill-rotation speed
(Figure 18).
1
1
2
3
4
ESC
Drill-rotation-speed Screen
1. Drill-rotation speed meter
2. Right arrow (increase
speed)
(Figure 18).
OK
4 3 2
Figure 18
3. OK button (sets the
drill-rotation speed)
4. Left arrow (decrease
speed)
Thrust-control Screen
Main This screen allows the user to increase or decrease the thrust
output of the machine.
To access this screen, press button number 3 on the
Operating Screen (page
To change the thrust output of the machine, perform the
following:
1. Press button number 1 to increase the torque output,
or button number 3 to decrease the torque output of
the machine
1
1
5
2
6
3
7
4
8
g025581
4
1. Increase the torque output
2. Torque-output meter
2. After setting the torque output, press button number
4 (Figure
Screen (page
28
26).
(Figure 19).
2
OK
ESC
3
Figure 19
Thrust-control Screen
3. Decrease the torque
output
4. Return to the previous
screen
19), and return to the
26).
Main
5
6
7
8
g025085
Main Operating