Toro 4045 Operator's Manual page 30

Main-selection Screen
To access this screen, press the down arrow on the
Functions Displayed in Torque Screen (page
This screen allows the user to choose from the following
options:
•
Button 1—Return to the
Screen (page 26) as shown in
•
Button 2—Lubrication and maintenance chart
•
Button 3—Read error codes
•
Button 4—Return to the
as shown in Figure 22
•
Button 5—Diagnose and adjust parameters
•
Button 6—Adjust the loader calibration
•
Button 7—Clear a service reminder
•
Button 8—Air-hammer control
•
OK button—Return to the
25) as shown in Figure 22
1
1
2
3
4
ESC
9
Main-selection Screen
1. Machine information
2. Lubrication and
maintenance chart
3. Loader calibration
4. Diagnose and adjust
parameters
5. Air-hammer control
27).
Machine-information
Figure 22
(Figure 22)
Main-selection Screen (page 30)
(Figure
(Figure
(Figure 22)
(Figure 22)
Control-select Screen (page
2 3 4
OK
5
8 7 6
Figure 22
6. Clear service reminder
7. Control/joystick selection
8. Error codes
9. Return to the Main
Operating Screen
Lubrication and Maintenance Screens
Main Drill To access this screen, press button number 2 on the
Main-selection Screen (page
These screens provide the user with maintenance schedules
at 10-hour, 50-hour, 250-hour, 500-hour, and 1,000-hour
increments.
Note: Press the OK button to exit this screen.
(Figure 22)
Press the following buttons to attain the subsequent
maintenance schedule:
•
Button 1—10-hour and 50-hour maintenance schedule
(Figure
•
Button 2—250-hour maintenance schedule
22)
•
Button 3—500-hour maintenance schedule
22)
•
Button 4—1,000-hour maintenance schedule
5
6
7
8
g025088
10-Hour and 50-Hour Maintenance Screen
30
30).
24)
Figure 23
Main Maintenance Screen
Figure 24
(Figure 25)
(Figure 26)
(Figure 27)