Premaintenance Procedures; Opening The Front Hood; Opening The Rear-Access Door - Toro 4045 Operator's Manual

Premaintenance
Procedures

Opening the Front Hood

1. Park the machine on a level surface, stop the engine,
and remove the ignition key.
2. Lift up on the latch as shown in
Note: Ensure that the key is in the open (horizontal)
position as shown in
Figure 98
1. Key in the open
(horizontal) position
3. Pull up on the hood latch as shown in
Figure 99
1. Hood latch
4. Keep the hood latch
on the handle as shown in
Figure 98.
Figure 98.
2. Hood latch
Figure 99.
(Figure 99) pulled up, and lift up
Figure 100.
1. Hood handle

Opening the Rear-access Door

1. Park the machine on a level surface, stop the engine,
and remove the ignition key.
2. Push on the left side of the panel handle, and pull the
panel open when the handle is released
1. Rear-access door handle
81
Figure 100
(Figure
Figure 101
101).