Get Started; Set Up Your A360; Choose One Option For Setup: Computer Or A Compatible Mobile Device; Option A: Set Up With Your Computer - Polar Electro A360 User Manual

GET STARTED

SET UP YOUR A360

When you get hold of your new A360, it's in storage mode. It wakes up when you plug it into a computer for
setup or a USB charger for charging. We recommend that you charge the battery before you start using your
A360. If the battery is completely empty, it takes a couple of minutes for the charging to start. See
for detailed information on charging the battery, battery operating times and low battery notifications.

CHOOSE ONE OPTION FOR SETUP: COMPUTER OR A COMPATIBLE MOBILE DEVICE

You can choose how to set up your A360, with a computer and a USB cable or wirelessly with a compatible
mobile device. Both methods require an Internet connection.
Mobile setup is convenient if you don't have access to a computer with a USB port, but it might take
l
longer.
Wired setup is quicker and you can charge your A360 at the same time, but you need a USB cable and
l
computer available.

OPTION A: SET UP WITH YOUR COMPUTER

1. Go to flow.polar.com/start
ware if needed.
2. Push down the top part (A) of the USB cover inside the bracelet to access the micro USB port and plug
in the supplied USB cable (B).
Don't charge the device when its USB port is wet. If the USB port of your A360 has gotten wet,
let it dry up before plugging in.
and install the FlowSync software to set up your A360 and
10
Batteries
update the firm-