Adjustment Of The Speed Controller - JUKI AMS-221EN Series Engineer's Manual

(36) Adjustment of the speed controller

Standard adjusting value of the speed controller for the presser cylinder
1. Loosen the nut
turn and tighten the nut
Standard adjusting value of the speed controller for the 2-step stroke cylinder
1. Loosen the nut
turn and tighten the nut
For presser cylinder (left)
Type L (2-step presser with 2-step stroke)
For presser cylinder (left)
Standard Adjustment
and once turn the knob
.
and once turn the knob
.
fully in Direction A. Then, turn this knob in Direction B by one
fully in Direction A. Then, turn this knob in Direction B by one
B A
For presser cylinder (right)
B A
For 2-step stroke cylinder
For presser cylinder (right)
– 56 –