Chapter 4 Performance specification
Remark
[Note1] This module can be connected with dedicated modem/dial-up modem only via RS-232C channel.
[Note2] For such modems as optical modem and wireless modem supporting RS-422 communication,
communication via RS-422 channel is available without additional setting in Cnet I/F module.
[Table4.5] Switches available to connect with modem
Switch value
0
1
2
3
4
5
6
7
8
Available if set to stand-alone channel in Ver. 2.0
9
Basic setting sequence of Cnet I/F module with Frame Editor is as follows.
1)
Run Frame Editor program in Windows.
2)
Select RS-232C of communication channel in basic parameter items of Frame Editor and set such
transmission specifications of communication speed, data, stop bit, etc. as in transmission type set in
dedicated modem.
G3L-CUEA
G4L-CUEA
Unavailable
Unavailable
Unavailable
Unavailable
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Unavailable
Unavailable
Ver.2.0
Module type
G6L-CUEB
Available
Available
Available
Unavailable
Not used
Not used
Not used
Not used
Unavailable
G6L-CUEB module only available in Ver. 2.0
4-22
G6L-CUEC
Unavailable
Unavailable
Unavailable
Unavailable
Not used
Not used
Not used
Not used
Unavailable
Ver.2.0