LG GLOFA-GM Series User Manual page 91

Chapter 5 Frame Editor
2) Reading (upload)
Basic parameters and frame data downloaded in Cnet I/F module are saved in flash memory as kept inside Cnet
I/F module even if powered off. And these data can be also saved in file by reading via Frame Editor. The
following describes the sequence of frame reading.
A) Select [Online]-[Connect] in Frame Editor and connect to PLC.
B) If connected, select [Online]-[Read] to display the Read dialog box as below and then select channel and
Read type via slot No., communication type and communication option.
C) After required items are selected, select menu [Read] to display the status in which basic parameters and
frame are read.
D) The data read can be saved in file via file saving menu.
5-26