Chapter 5 Frame Editor 5-1~5-43; Basic Functions - LG GLOFA-GM Series User Manual

Chapter 5 Frame Editor
Chapter 5 Frame Editor

5.1 Basic functions

Frame Editor is a WINDOWS application to set basic operation mode of Cnet I/F module and to operate Run/Stop frame
download, etc. Frame Editor is also upgraded to Ver.2.0 to fit the functions of module Ver.2.0 and is developed to be in
100% compliance with former versions of Frame Editors along with additional functions to support supplemented features
of Cnet Ver.2.0. Updated version of Frame Editor can be used through downloads in Internet Home Page of LG Industrial
Systems(http://www.lgis.lg.co.kr/fa). This manual is based on Frame Editor Ver.2.0 for instruction of its functions. Basic
functions of Frame Editor are as follows.
Setting of basic parameters
Frame edit for user mode
Reading/Writing of frame and basic parameters
Switching of module operation
Monitoring of TX/RX frame
Saving of frame and parameter files
Change of online mode
Management of flash memory
Frame Editor can be used with its execution program of FEDIT20.EXE as copied to desired folder and run without
additional installation.
Remark
[Note1] GM7 series doesn't use Frame Editor. Parameter and protocol required for communication can be composed in
communication parameters inside GMWIN.
Ver. 2.0
Ver. 2.0
Ver. 2.0
5-1