LG GLOFA-GM Series User Manual page 101

Chapter 5 Frame Editor
The following is how to change online mode of Cnet I/F module in the structure of [Figure5.13].
1) Select No.9 mode switch of Cnet I/F module continuously with power on and perform online connection via
Frame Editor.
2) Select change items of online mode in online menu to enter mode change menu.
3) Set slot No.0 where Cnet I/F module is mounted and connection stage to local in online mode change box.
4) Select desired type of channel operation from channels of interlocking and stand-alone.
Remark
[Note1] Setting values are valid only in RS-232C channel for G6L-CUEB and only in RS-422 channel for
G6L-CUEC. In case of two types of modules, the operation isn't available in interlocking mode.
Basic value if not set is user mode all for RS-232C/RS-422 in stand-alone channel.
5) If mode is set as required, select Write button to change modes. If modes are changed, the following
message will be displayed to indicate operation mode completed.
5-36
[Note]