Chapter 8 Exercising program
Set parameters as below and click on OK button.
-
Other
station No.
31
H) Check if entry list 0 and entry list 1 are registered as in the figure below and then press Close button to
go to communication parameter window.
I) Click on OK button in communication parameter window to complete parameter setting input.
J) Prepare program as in the figure below and let it downloaded to GM7 basic unit of master station. Refer
to user's manual of GMWIN for the details of programming and downloading.
Size
Mode
1
RX
(Refer to the figure above)
8-51
Area to read
%QW0.O.O
Saving area
%QW0.1.0
(Refer to the figure above)