LG GLOFA-GM Series User Manual page 149

Chapter 7 Communication function
Tail
Use the form of [Tail].
-
What is available for Tail is 1 English character, 1 figure or "NUL(H00)", "STX(H02)",
-
"ETX(H03)", "EOT(H04)", "ACK(H06)", "NAK(H15)", "SOH(H01)", "ENQ(H05)",
"BEL(H07)", "BS(H08)", "HT(H09)", "LF(H0A)", "VT(H0B)", "FF(H0C)", "CR(H0D)",
"SO(H0E)", "S1(H0F)", "DLE(H10)", "DC1(H11)", "DC2(H12)", "DC3(H13)",
"DC4(H14)", "SYN(H16)", "ETB(H17)", "CAN(H18)", "EM(H19)", "SUB(H1A)",
"ESC(H1B)", "FS(H1C)", "GS(H1D)", "RS(H1E)", "US(H1F)", "DEL(H7F)" or
"BCC(HFE)" only as of control character.
Ex.1) [NUL], [EOT]
Ex.2) NUL, EOT (← × : [ ] wasn't used.)
Up to 3 are allowable continuously.
-
Ex.1) [EOT][ETX][NUL] (← ○)
Ex.2) [A][NUL][EOT][ETX]
BCC can be used in Tail to detect errors. BCC can be available only when [BCC] is
-
surely set. For detailed contents of BCC setting, press "BCC setting" button on the
right for the selection.
BCC setting: Set BCC if required.
7-30
(← ○)
(← × : 4 were used continuously.)