LG GLOFA-GM Series User Manual page 292

Chapter 8 Exercising program
C) Read response frame : Set RX frame to receive TX frame which responds to Read request in temperature
controller. The right figure shows setting screen of RX frame. CON_ACK is entered in frame name, ARRAY
segment in RX data area of temperature controller's response frame, HEX in command, CONST where is out
of '00' and ARRAY in STATUS area as RX data is HEX '00' with STATUS value checked in PLC program.
[Note1]
Set RX data area to ARRAY and conversion option to None in order to allow RX data to be received in HEX
value by PLC program.
8-41