LG GLOFA-GM Series User Manual page 246

Chapter 7 Communication function
E) Select Remote 1 of connection stages.
Remark
[Note 1] Station No shall be input in Cnet Ver2.0 or later.
In case of earlier Ver, setting of Station No is unnecessary Station No shall be set in frame editor
F) GMWIN tries remote connection and if remote connection is completed, the following screen is displayed.
G) This means that remote 1 stage connection is completed just like the connection status that RS-232C cable is
connected as moved, where all functions in On-line menu are available.
Remark
[Note 1] For application of GMWIN after remote connection, On-line menu can be used as in local connection.
Functions for program download/upload/monitor are available.
[Note 2] PLC control via modem depends much on modem performance and phone line status. If phone line is in
deficient status, connection may be released. In this case, try re-connection not immediately but in
approx. 30 seconds starting from (1).
7-127