Table of Contents
Advertisement
The maximum load of the respective fastening nets
is 1.5 kg.
Multifunctional pocket
Operation
Unfolding
Folding
Removing and inserting
Removing
›
Remove the roll-up cover.
›
Take out the folded pocket in an upwards direc-
tion.
Inserting
Stowing the pocket under the variable loading
floor
›
Remove the variable loading floor.
Or:
›
Unfold the variable loading floor in the upper posi-
tion and lift it in the rear area.
Storage space and interior equipment ›
›
Fold down the front
hooks on both sides of
the boot.
›
Separate the strip in
the rear by turning it in
the direction of the ar-
row and placing it on
the hooks.
›
Remove the rear strip
from the hooks.
›
Place the rear strip
against the front strip
and fold the two parts
together by turning
them.
›
Insert the end of the
strip marked with
in-
to the right-hand
mount and the end of
the strip marked
with
into the left-
hand mount.
Multifunctional pocket
Net partition
Attach the net partition
Unfolding/folding
The folded mesh partition can be stowed under
the variable loading floor.
Attach at the back
›
Remove the variable loading floor or adjust it to its
lowest position.
›
Remove the roll-up cover or fold up the rear seat
backrests.
›
First insert the crossbar into the mount
side and push it forwards.
149
›
Insert the pocket into
the recesses of the
side partitions.
If the multifunction
pocket and the roll-up
cover are stowed at
the same time, the roll-
up cover at the front
must cover the multi-
function pocket.
›
Open the arms of the
cross bar until you hear
the locking button au-
dibly click into place.
›
Press the safety button
and fold the arms of
the crossbar together.
on one
A
Advertisement
Table of Contents
