Traffic Sign Recognition - Skoda KODIAQ 2019 Owner's Manual

Hide thumbs Also See for KODIAQ 2019:
Table of Contents

Advertisement

182 Driver assist systems ›
Driving on a road with narrow lanes or on the lane
edge.
Driving round bends.
The system can draw attention to objects along the
road, such as high guard rails or noise barriers.
The system might not warn of a vehicle e.g. in the
following cases, or a warning may only be issued in-
correctly.
Unfavourable weather conditions.
A very fast approaching vehicle.
When going round a sharp bend or a roundabout.
Settings
In the instrument cluster display
The system settings are made in the display of the
instrument cluster in menu item Assist Systems.
In infotainment
The system settings are made in the infotainment
system in the following menu.
Or:
Troubleshooting
Message regarding system unavailability
Stop the engine and start again.
If the system is still not available, seek the help of a
specialist garage.

Traffic sign recognition

Usage
The road sign recognition shows road signs in the
display of the instrument cluster. This also indicates
exceeding the speed limit.
Functionality
Displayed road signs
Speed limit.
Overtaking prohibited.
Additional characters, e.g. speed limit in wet condi-
tions.
WARNING
Road signs on the road always have priority over the
road signs shown on the display.
Traffic sign recognition
Towing a trailer
If a trailer or other accessory is connected to the
trailer socket, trailer-relevant road signs are also dis-
played.
Driving on roads without speed limits
If you are on a road with no speed limits, the road
signs
will appear in the display.
Example of road sign display
Example of additional characters
Example of several simultaneously rec-
ognised road signs.
Speed units
The speed indications in the road signs shown refer
to the speed units that are common in the country.
For example, the
display may refer to 30 km/h or
30 mph depending on the country.
Restriction
The system function may be restricted in the follow-
ing cases.
The sensor is blinded by the sun or oncoming traf-
fic.
The field of view of the sensor is limited by an ob-
stacle or a preceding vehicle.
In the event of unfavourable weather conditions.
At high speeds.
The road signs are hidden, damaged, or are non-
standard.
The road signs are attached to flashing neon signs.
Non-current or unavailable map documents for the
navigation.
Settings
In Infotainment, in the following menu.
Or:
Road Sign Recognition
Show in instrument cluster - Activation/deactivation of
the additional road signs in the display of the in-
strument cluster

Advertisement

Table of Contents
loading

Table of Contents