Table of Contents
Advertisement
MobileView User Manual
DVR C
5
ONFIGURATION
Onboard programming of the DVR can be performed using either the onboard status keypad or the
MobileView Test Kit. Using the status keypad enables you to manually enter information to configure the
vehicle's DVR. Using the Test Kit enables you to configure the DVR, and also to copy and save the DVR
configuration data and transfer it to another vehicle.
If you are using a Test Kit for DVR configuration,
see section 4.1 Connecting the Test Kit to the DVR
to connect the Test Kit to the DVR.
The DVR is configured using the five keys
on the keypad (Figure 51). Use the
advance through the menus. Use the
move from space to space when inputting data.
Use the
keys to scroll through alphanumeric
characters and symbols.
Note: To alter the contrast of the keypad LCD display window,
simultaneously press the
use the
keys to adjust the contrast.
5.1
S
C
YSTEM
ONFIGURATION
Note: If you are using the onboard status keypad, skip step 1.
1)
Press the POWER button located below the Test
Kit's monitor. The keypad displays the opening
screen (Figure 52).
2)
Press and hold the
displays the Enter Access Code screen
(Figure 53).
3)
Press the following sequence of keys:
,
,
,
,
,
been entered, the Test DVR display (Figure 54)
appears.
Note: If an access code is not entered within 10 seconds,
the screen will revert to the opening display.
4)
At the Test DVR display (Figure 54), press the
key to advance to the Select Camera menu
(Figure 55).
1036564B / October 2002
key to
keys to
keys and, while pressing those keys,
key until the keypad
. When the access code has
Figure 51.
MobileView keypad
KALATEL INC.
MOBILEVIEW II
Figure 52.
Opening screen
ENTER ACCESS CODE
XXXXXX
Figure 53.
Enter Access Code screen
TEST DVR'S INPUT/OUTPUT
NO
Figure 54.
Test DVR display
5 DVR Configuration
NEXT
29
Advertisement
Table of Contents
