Viewing Cameras - GE MobileView User Manual

4 Testing Connections
4.3 V C
IEWING AMERAS
1) Press to advance to the Select Camera display
(Figure 48).
2) Push to enter the Select Camera display for
camera 1 (Figure 49).
3) Use the keys to scroll through the cameras.
This enables you to cycle through all eight camera
ports, viewing the video feed from each
camera on the test kit's LCD screen.
Note: The camera number shown on the keypad refers to the
BNC port connection and not necessarily to the assigned number
of the camera in the system. For example, whichever camera is
plugged into the DVR's BNC port 1 will be displayed as camera 1
on the keypad.
4) Adjust and set the field of view for each camera
(section 2.4.3 Adjusting Cameras for Functional Field of View).
Focus the camera if necessary.
5) After viewing and adjusting all cameras in the
system, scroll back with the
Select Camera display (Figure 48).
6) Press the key until you reach the exit menu
(Figure 50).
7) To exit, select "yes" and press the
return to another menu, press the
then use the key to advance to the
desired menu.
8) When finished using the test kit, turn the monitor
off before removing the 34-pin interface box
from the DVR chassis.
28
SELECT CAMERA TO SETUP
NONE
Figure 48.
SELECT CAMERA TO SETUP
1
Figure 49.
key to the first
DO YOU WANT TO EXIT?
YES
key. To
Figure 50.
key and
MobileView User Manual
Select Camera display
Select Camera display—camera 1
Exit menu
1036564B / October 2002
NEXT
NEXT
Y/N
NEXT