Testing Outputs; Dvr Status - GE MobileView User Manual

Mobile digital video recorder
Table of Contents

Advertisement

MobileView User Manual
5)
Test the Impact Sensor by tapping on the front
end of the sensor. Watch the keypad while
tapping; it should display input 2 as open
(Figure 41). When you stop tapping the
sensor, the keypad should reset to showing
input 2 as closed (Figure 40). If the keypad
does not show input 2 opening and closing,
check the Impact Sensor's connections to the
DVR (see section 3.2.3.1 Impact Sensor Connections).
6)
Continue testing until all inputs have
successfully been connected to the DVR.
4.2.2 T
O
ESTING
UTPUTS
1)
From the Current Status menu (Figure 41),
press
to proceed to the Test Outputs menu
(Figure 42).
2)
Press
to test output 2 (Figure 43). If a status
light is connected to output 2, the light
illuminates.
3)
Press
again to test output 1 (Figure 44).
If a status light is connected to output 1, the
light illuminates.
4)
Press
again to test both outputs (Figure 45).
Both lights illuminates.
4.2.3 DVR S
TATUS
1)
To display the status of the DVR, press
the Test Outputs menu (Figure 45). The screen
will display whether the ignition is on or off, the
current temperature of the DVR (in Celsius),
and whether the DVR door is open or closed.
Figure 46 shows the keypad screen without a
DVR in the system. Figure 47 shows the
keypad screen with a DVR in the system.
2)
Press
again to return to the Test DVR
display (Figure 37).
1036564B / October 2002
CURRENT STATE OF INPUTS:
1L 2H 3H 4H 5H 6H
Figure 41.
Current Status menu—input 2 open
TO TEST OUTPUTS PRESS UP
OUT 1 <OFF> OUT 2 <OFF>
Figure 42.
Test Outputs menu
TO TEST OUTPUTS PRESS UP
OUT 1 <OFF> OUT 2 <ON>
Figure 43.
Test Outputs menu—testing output 2
TO TEST OUTPUTS PRESS UP
OUT 1 <ON> OUT 2 <OFF>
Figure 44.
Test Outputs menu—testing output 1
TO TEST OUTPUTS PRESS UP
OUT 1 <ON> OUT 2 <ON>
Figure 45.
Test Outputs menu—testing both outputs
from
IGNITION OFF
DOOR ------
Figure 46.
DVR status menu— no DVR in system
IGNITION ON
DOOR CLOSED
Figure 47.
DVR status menu—DVR in system
4 Testing Connections
NEXT
NEXT
NEXT
NEXT
NEXT
TEMP ----C
NEXT
TEMP
26C
NEXT
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mobile view

Table of Contents