GE Ettan IPGphor 3 Operating Instructions Manual page 71

Protocol identification screen
The protocol identification screen is the first screen that appears after the diagnostic
program is completed. The frist row starts with Protocol #1, Name. The default location
of the cursor is always under the protocol number "1".
A protocol can be selected by pressing the Up and Down arrow keys to display the
number of a protocol. Once the selected protocol is started, the LCD screen indicates
the parameters of the step currently being carried out.
The protocol identification screen comprises the following programmable items:
•
•
•
•
P r o t # 1 F i l e 1
R e h y d r a t e 0 : 0 0 H r @ 2 0 ˚ C
I E F @ 2 0 ˚ C 5 0 µ A / S t r i p
1 S t r i p s 0 S t e p s
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC
Protocol number and name
Rehydration time, temperature
IEF run conditions (temperature and maximum current/strip)
Number of strips and number of steps in the selected protocol.
5.3 Perform a run from the control panel
5.3.1 Ettan IPGphor 3 control panel functionality
5 Operation
71