GE Ettan IPGphor 3 Operating Instructions Manual page 18

2 Safety instructions
2.1 Safety precautions
18
WARNING
Ettan IPGphor 3 is a high voltage instrument that can cause fatal
electrical shock if the safety features are disabled. The safety lid
must be securely closed before starting a protocol.
WARNING
In a situation where there is a risk of injury, turn off the instrument
by switching the mains power switch (located on the rear panel)
to position 0. Malfunctions must be rectified before Ettan IPGphor 3
Isoelectric Focusing System is restarted.
WARNING
The vents at the front, back, and bottom of Ettan IPGphor 3 must
not be obstructed. Air must be free to circulate for the cooling ap-
paratus to function correctly. There should be a minimum of 10
cm unobstructed space behind the rear panel of the instrument.
WARNING
Avoid spilling liquids on the body of the instrument. If large volumes
of liquid have penetrated the casing of the instrument and come
into contact with the electrical components, immediately switch
off the instrument and contact an authorized service technician.
CAUTION
Always wear protective gloves when working with rehydration so-
lution.
CAUTION
Always wear gloves when handling IPG strips and the equipment
that comes in contact with them. This will help minimize protein
contamination which can result in artifactual spots in stained 2-D
gel patterns.
Ettan IPGphor 3 Operating Instructions 28-9635-51 AC