Table of Contents
Advertisement
2.9.4 Breakpoint 28-36
2.9.5 Breakpoint 37-45
2.9.6 Breakpoint 46-54
2.9.7 Breakpoint 55-63
2.9.8 Breakpoint 64-72
2.9.10 Breakpoint 73-81
2.9.11 Breakpoint 82-90
2.9.12 Breakpoint 91-99
2.9.13 Breakpoint 100-108
2.9.14 Breakpoint 109-117
2.9.15 Breakpoint 118-120
2.10 Measured Values: Read only. Allows you to view measured values for diagnostic purposes.
2.10.1 Main Output: The value for Level/Volume, always displayed here in percent
2.10.2 Output No Linearization: The value for Level, always displayed here in percent
2.10.3 Output No Offsets: The value for distance, displayed in sensor units.
3. Diagnostics
3.1 Fault Reset: Clears the following fault
3.2 Echo Profile: Allows you to request the current echo profile
3.3 Trend: Shows current trend
3.4 Peak Values
3.4.1 Min Measured Value: The minimum recorded sensor value, reported in units.
3.4.2 Max Measured Value: The maximum recorded sensor value, reported in units.
3.4.3 Minimum PV: The minimum recorded Primary Value from the Analog Input Function Bloack 1.
3.4.4 Maximum PV: The maximum recorded Primary Value from the Analog Input Function Bloack 1.
3.4.5 Minimum SV: The minimum recorded Secondary Value from the Analog Input Function Bloack 1.
3.4.6 Maximum SV: The maximum recorded Secondary Value from the Analog Input Function Bloack 1.
3.5 Electronics Temperature
3.5.1 Min value: Displays (in Celcius) the minimum temperature recorded by the internal electronics. The high and
low values are maintained over a power cycle.
3.5.2 Max Value: Displays (in Celcius) the maximum temperature recorded by the internal electronics. The high and
low values are maintained over a power cycle.
3.5.3 Internal Temperature: Read only. Displays (in Celcius) the current temperature on the circuit board recorded by
the internal electronics.
MPR180416 Rev. B
27
www.bindicator.com
Advertisement
Table of Contents
