Table of Contents
Advertisement
QUICK START WIZARD VIA LCD PUSH BUTTONS
1.
Press RIGHT arrow to enter Program mode.
2.
Choose Quick Start (1) and then Quick Start Wizard (1.1)
3.
Follow the steps then choose Finish to save Quick Start parameter changes (shown below) and return to Program
menu or press LEFT arrow to return to Measurement mode.
To Add or Delete Digits Using Push Buttons:
NOTE: When the 'ENTER' icon is highlighted, press the UP arrow to insert a digit on the right, press the DOWN arrow to
delete the right-most digit, press the RIGHT arrow to accept the value, or the LEFT arrow to cancel.
1.
Navigate to the parameter you wish to modify and press RIGHT arrow to edit it. The value will be highlighted.
2.
Press UP arrow or DOWN arrow to delete the highlighted value, or LEFT arrow to modify the value from the left-most
digit, starting with the plus/minus sign.
3.
With the plus or minus sign highlighted, press UP arrow or DOWN arrow to change it. Press RIGHT arrow to highlight
the next digit to the right.
4.
Use UP arrow or DOWN arrow to modify the highlighted digit. Scroll past 9 to reach the decimal point.
5.
When the value is complete, press RIGHT arrow until the ENTER icon is highlighted , then press RIGHT arrow to accept
the value.
To modify a text string:
1.
Navigate to the parameter you wish to modify and press RIGHT arrow to edit it. The string will be highlighted.
2.
Follow the same steps as above, to add, delete, or modify characters.
QUICK START WIZARD:
1.
Press RIGHT arrow to activate PROGRAM model and open menu level 1.
2.
Press RIGHT arrow twice to navigate to menu item 1.1 and open the Quick Start Wizard.
3.
At each step, press DOWN arrow to accept default values and move directly to the next item, OR press RIGHT arrow to
open EDIT mode: the current selection is highlighted.
4.
Scroll to desired item and press RIGHT arrow to store the change, then press the DOWN arrow to continue.
At any time, you can press UP arrow to go back, or LEFT arrow to cancel.
Once the six parameters of the Quick Start Wizard have been added - see next page , press the DOWN arrow to finalize
and save to complete the wizard.
Press LEFT arrow to return to Measurement Mode.
MPR180416 Rev. B
15
www.bindicator.com
Advertisement
Table of Contents
