Monitoring; Events - Ingeteam INGECON SUN 1Play TL M Series Installation And Operation Manual

Ingeteam

12.6.1. Monitoring

This menu includes a series of screens which show the main variables being monitored. To move between the
different screens use the keys
The structure and interpretation of the variables of this menu are shown below:
Pac Inverter AC power, in watts.
Qac Inverter AC reactive power, in reactive volt-amperes.
Sac Inverter AC apparent power, in volt-amperes.
PhiCos Cosine of Phi. Cosine of the phase shift angle between the voltage and current supplied by the
inverter. The cosine of phi can be positive or negative:
• Positive: the inverter injects positive reactive energy. The current is ahead with respect to
the voltage.
• Negative: the inverter injects negative reactive energy. The current is delayed with respect
to the voltage.
Vac AC voltage of the inverter, in volts.
Iac AC current through the inverter, in amperes.
Fac Frequency generated by the inverter, in hertz.
Pdc Inverter DC power, in watts.
Pdc1 String 1 DC power, in watts.
Pdc2 String 2 DC power, in watts.
Riso Insulation resistance of the PV array, in kiloohms.
Vdc1 DC input voltage of string 1.
Vdc2 DC input voltage of string 2.
Idc1 DC input current of string 1.
Idc2 DC input current of string 2.
Total
Energy Total energy fed through the inverter throughout its useful life.
Time Total time that the inverter has been feeding the grid.
Connections Total number of network connections.
Partial
Energy Partial energy fed by the inverter.
Time Partial time that the inverter has been connected to the grid.
Connections Partial number of network connections.
Pac AC power, in watts
Pwatt Power fed to the public grid in self-consumption mode, in watts.
Ratio Self-consumption ratio. Displays the consumption percentage of the loads being fed by the power
generated by the inverter.

12.6.2. Events

This menu shows the events occurring in the inverter.
Alarms
The alarms indicate current events in the inverter that lead to its shut-down. In section "17.1. Alarms. LED
messages" you can consult the list of alarms and their solution.
Warnings
The warnings are events that do not lead to the shut-down of the inverter but do need maintenance action. In
section "Warnings" you can consult the list of warnings and their solution.
80
and .
ABE2011IQM01_B - Installation and Operation Manual
Display control